Description
Product information "Pini Spot Beam, 2-panel, black/wood"
Crafted from high-quality metal in an elegant black finish and sustainable wood, the spot light bar blends harmoniously into any interior. The two swivelling heads offer you maximum flexibility to direct the light precisely – perfect for workspaces, reading corners or for highlighting special interior design details.
With two GU10 sockets and a maximum wattage of 10W each, you have the freedom to choose the right bulbs to suit your preferences (bulbs not included). Whether you prefer a cosy warm white or a clear daylight tone, the spotlight bar always provides the ideal lighting.
Properties
| Base: | GU10 |
|---|---|
| Besonderheiten1: | LED-LEUCHTMITTEL VERWENDBAR - Die Leuchte ist für passende LED-Leuchtmittel geeignet / dimmbar |
| Besonderheiten2: | NACHHALTIGES HOLZ - Das verarbeitete Holz dieser Leuchte stammt aus nachhaltiger Forstwirtschaft und ist mit dem FSC®-Zertifikat (FSC-C155669) ausgezeichnet. |
| Besonderheiten3: | SCHWENKBARE KÖPFE - Optimal für größere oder verwinkelte Räume sind die schwenkbaren Köpfe dieser Leuchte. Stelle den Ausleuchtungsbereich ganz flexibel ein, so dass keine dunklen Ecken entstehen. |
| Besonderheiten4: | DIMMEN MÖGLICH - über einen externen Dimmer und bei Verwendung des geeigneten Leuchtmittels ist diese Leuchte ganz einfach dimmbar. Variiere die Helligkeit also jederzeit ganz flexibel und Dimmer |
| Besonderheiten5: | LIEFERUMFANG - 1x Deckenstrahler - Montagematerial enthalten - HxBxT: 145 x 300 x 60 mm - Material: Metall/Holz, Farbe: schwarz/holz hell |
| Colour: | black/wood |
| Depth in cm: | 6 |
| FSC label: | yes |
| Height in cm: | 14,5 |
| Illuminant information: | Suitable for LED lamps |
| Illuminant type: | LED |
| Material: | Metal/wood |
| Number of lamps: | 2 |
| Power in watts: | 10 |
| Product weight in kg: | 0,350 |
| Protection class: | 1 |
| Protection class: | IP20 |
| Suspense: | 220-240 |
| Version: | Spot bar, 2 flames |
| Width in cm: | 33,3 |
| dimmable: | Externally dimmable when using suitable light sources |
| further features: | FSC® |
| swivelling: | Heads are swivelling |
Safety instructions
DANGER! Risk of fatal electric shock!
The electrical connection and all other work must only be carried out by a suitably qualified professional.
The product may contain small parts which could be swallowed. Please therefore keep it out of the reach of children under three years of age. If the product was packaged in a plastic bag, please dispose of it properly and do not allow children to play with it. There is a risk of suffocation.
This product is not a toy and must not be used as such by children.
Light sources and control units can reach high temperatures during operation: there is a risk of fire if used incorrectly and a risk of injury when replacing the light source. Always allow the product to cool down before carrying out any work. Ensure adequate ventilation, a stable footing and do not expose it to other heat sources (direct sunlight, heating or similar).
Ensure that the correct type of light source is always used and that the maximum specified power is not exceeded (see product label).
Unless otherwise stated, the product is intended exclusively for domestic indoor use and must be protected from moisture and other weather conditions such as rain, snow and fog. The product is not intended for commercial or industrial use.
Products for outdoor use are marked with an IP code corresponding to their degree of protection. Only corrosion-resistant screws must be used for installation. Floor lamps must not be placed in recesses or other depressions where water may accumulate.
If this product is damaged, it must be taken out of service immediately and the damage repaired. Repairs must only be carried out by the manufacturer, its service representative or a similarly qualified specialist.
Clamp-on lights must not be used on beds, sleeping furniture or reclining furniture, as there is a risk of fire. Clamp lamps must not be clamped onto poles or pipes.