LED reflector PAR51 GU10 5W 380lm warm white 3000K
€2.49
Available,
delivery time Instant download
Description
Product information "LED reflector PAR51 GU10 5W 380lm warm white 3000K"
Properties
| Beam angle in degrees: | 38 |
|---|---|
| Colour: | grau/warmweiß |
| Diameter in cm: | 5 |
| EEK: | E |
| EPREL_ID: | 851523 |
| Energy efficiency class: | E |
| Feature 1: | Average service life: 25,000h |
| Feature 2: | Average switching cycles: 15000 |
| Feature 3: | Ra index: >80 |
| Height in cm: | 5 |
| LED: | Yes |
| Light colour: | 3000 |
| Light colour in Kelvin: | 3000 |
| Luminous flux: | 450 |
| Luminous flux in lumen: | 450 |
| Material: | Glass/plastic |
| Power in watts: | 4,8 |
| Product weight in kg: | 0,036 |
| Protection class: | IP20 |
| Socket on the lamp: | GU10 |
| Suspense: | 230 |
| Version: | LED reflector lamp PAR51 |
| kWh/1000h: | 5 |
| kWh_1000h: | 5 |
Safety instructions
DANGER! Risk of fatal electric shock!
The electrical connection and all other work must only be carried out by a suitably qualified professional.
The product may contain small parts which could be swallowed. Please therefore keep it out of the reach of children under three years of age. If the product was packaged in a plastic bag, please dispose of it properly and do not allow children to play with it. There is a risk of suffocation.
This product is not a toy and must not be used as such by children.
Light sources and control units can reach high temperatures during operation: there is a risk of fire if used incorrectly and a risk of injury when replacing the light source. Always allow the product to cool down before carrying out any work. Ensure adequate ventilation, that the product is stable, and do not expose it to other heat sources (direct sunlight, heating or similar).
Ensure that the correct type of light source is always used and that the maximum specified power is not exceeded (see product label).
Unless otherwise stated, the product is intended exclusively for domestic indoor use and must be protected from moisture and other weather conditions such as rain, snow and fog. The product is not intended for commercial or industrial use.
Products for outdoor use are marked with an IP code corresponding to their degree of protection. Only corrosion-resistant screws must be used for installation. Floor lamps must not be placed in recesses or other depressions where water may accumulate.
If this product is damaged, it must be taken out of service immediately and the damage repaired. Repairs must only be carried out by the manufacturer, its service representative or a similarly qualified specialist.
Clamp-on lights must not be used on beds, sleeping furniture or reclining furniture, as there is a risk of fire. Clamp lamps must not be clamped onto poles or pipes.