Description
Product information "Bole outdoor base light motion detector stainless steel"
Designed for standard lamps, however, light sources are not included in the scope of delivery. However, it is possible to use LED lamps. The integrated motion detector ensures safety and visibility in the dark. The light duration and sensitivity can be adjusted. The decorative LED ring of the luminaire is activated by the twilight switch. This serves as an orientation light. So that you can start right away, all the necessary installation material is included in the scope of delivery.
Properties
| Base: | E27 |
|---|---|
| Base 2: | E27 |
| Colour: | stainless steel |
| Contains light sources: | Ja |
| Diameter in cm: | 11,9 |
| Feature 1: | SPRAYWATER PROTECTION - This luminaire has been awarded the IP44 protection rating and is therefore ideally equipped for outdoor use - even in places where weather protection is not as high |
| Feature 2: | MOTION DETECTOR - The practical motion detector has a detection angle of 120°, a detection range of 2-8m and can be adjusted in its sensitivity |
| Feature 3: | PRACTICAL DARKNING LIGHT - A twilight sensor is built into the LED rim on the light, which ensures that the light switches on automatically at dusk |
| Feature 4: | INTEGRATED LEDs - It doesn't get more energy-saving than LED! The LED elements are already integrated in this luminaire and you do not need an additional light source |
| Feature 5: | DELIVERY - 1x base luminaire with motion detector - LED wreath included - HxDm: 500 x 75 mm, Weight: 0.7kg - Material: metal/plastic, Colour: stainless steel |
| Height in cm: | 50 |
| Illuminant included: | Yes |
| Illuminant information: | LED integrated |
| LED: | Yes |
| Light_Source_Note_LM2: | Geeignet für Normallampe |
| Light colour: | 5000 |
| Light colour in Kelvin: | 5000 |
| Luminous flux: | 50 |
| Luminous flux in lumen: | 50 |
| Material: | Metal/plastic |
| Power in watts: | 0,8 |
| Product weight in kg: | 0,704 |
| Protection class: | IP44 |
| Protection class: | 1 |
| Suspense: | 220-240 |
| Type_LM2: | A60 |
| Version: | Outdoor base light 50cm with motion detector |
| further features: | Motion detector, Twilight sensor, With LED ring |
| kWh/1000h: | 1 |
| kWh_1000h: | 1 |
Safety instructions
DANGER! Risk of fatal electric shock!
The electrical connection and all other work must only be carried out by a suitably qualified professional.
The product may contain small parts which could be swallowed. Please therefore keep it out of the reach of children under three years of age. If the product was packaged in a plastic bag, please dispose of it properly and do not allow children to play with it. There is a risk of suffocation.
This product is not a toy and must not be used as such by children.
Light sources and control units can reach high temperatures during operation: there is a risk of fire if used incorrectly and a risk of injury when replacing the light source. Always allow the product to cool down before carrying out any work. Ensure adequate ventilation, that the product is stable, and do not expose it to other heat sources (direct sunlight, heating or similar).
Ensure that the correct type of light source is always used and that the maximum specified power is not exceeded (see product label).
Unless otherwise stated, the product is intended exclusively for domestic indoor use and must be protected from moisture and other weather conditions such as rain, snow and fog. The product is not intended for commercial or industrial use.
Products for outdoor use are marked with an IP code corresponding to their degree of protection. Only corrosion-resistant screws must be used for installation. Floor lamps must not be placed in recesses or other depressions where water can accumulate.
If this product is damaged, it must be taken out of service immediately and the damage repaired. Repairs must only be carried out by the manufacturer, its service representative or a similarly qualified specialist.
Clamp-on lights must not be used on beds, sleeping furniture or reclining furniture, as there is a risk of fire. Clamp lamps must not be clamped onto poles or pipes.