Skip to main content Skip to search Skip to main navigation

Menu

Description

Product information "Farly outdoor wall and ceiling light white"

The Farly outdoor wall lamp can be used in many different ways. Let an outside wall shine decoratively or provide safety on the walkways.

Suitable for standard lamps, but light bulbs are not included in the scope of delivery. Energy-saving LED lamps can also be used. The required installation material is included with the luminaire. You can start right away.

Properties

Base: E27
Colour: white
Diameter in cm: 28
Feature 1: LED LIGHT BULB USABLE - Insert an energy-saving light bulb into this luminaire, as you will not only be doing something good for the environment, but also saving electricity
Feature 2: DIMMING POSSIBLE - this luminaire can be easily dimmed via an external dimmer and by using the appropriate light source. So vary the brightness flexibly at any time
Feature 3: DELIVERY - 1x wall lamp - HxDm: 75 x 280 mm, Weight: 0,3kg - Material: metal/plastic, Colour: white
Feature 4: MOUNTING - this functional luminaire can be mounted on wall and ceiling
Height in cm: 7,5
Illuminant information: Suitable for standard lamp
Illuminant type: A60
Material: Metal/plastic
Number of lamps: 1
Power in watts: 20
Product weight in kg: 0,320
Protection class: IP44
Protection class: 1
Suspense: 220-240
Version: Außenwand- und Deckenleuchte
dimmable: Externally dimmable when using suitable light sources
note

Safety instructions

  1. DANGER! Risk of fatal electric shock!  

  2. The electrical connection and all other work must only be carried out by a suitably qualified professional. 

  3. The product may contain small parts which could be swallowed. Please therefore keep it out of the reach of children under three years of age. If the product was packaged in a plastic bag, please dispose of it properly and do not allow children to play with it. There is a risk of suffocation. 

  4. This product is not a toy and must not be used as such by children. 

  5. Light sources and control units can reach high temperatures during operation: there is a risk of fire if used incorrectly and a risk of injury when replacing the light source. Always allow the product to cool down before carrying out any work. Ensure adequate ventilation, that the product is stable, and do not expose it to other heat sources (direct sunlight, heating or similar). 

  6. Ensure that the correct type of light source is always used and that the maximum specified power is not exceeded (see product label). 

  7. Unless otherwise stated, the product is intended exclusively for domestic indoor use and must be protected from moisture and other weather conditions such as rain, snow and fog. The product is not intended for commercial or industrial use. 

  8. Products for outdoor use are marked with an IP code corresponding to their degree of protection. Only corrosion-resistant screws must be used for installation. Floor lamps must not be placed in recesses or other depressions where water can accumulate. 

  9. If this product is damaged, it must be taken out of service immediately and the damage repaired. Repairs must only be carried out by the manufacturer, its service representative or a similarly qualified specialist. 

  10. Clamp-on lights must not be used on beds, sleeping furniture or reclining furniture, as there is a risk of fire. Clamp lamps must not be clamped onto poles or pipes.

Recently viewed products